Dacor EOR, Инструкция по использованию и уходу

Страница: 29 / 36

27
warning
To prevent electrical shock and/or personal injury, make •
certain that the oven and light bulb(s) are cool and that
power to the oven has been turned off at the main power
supply before replacing the light bulb(s).
Always make sure the lens covers are in place when using
•
the oven(s). The lens covers protect the light bulbs from
breakage caused by high oven temperatures or mechanical
shock.
Use the pry stick with caution. Do not cause uneven stress
•
on the lens cover.
Replacing the lens cover without lining up the cut-out with
•
the light socket will damage the light fixture.
Light bulb replacement is considered to be a homeowner
maintenance operation. if the lights do not work, before
replacing them, please consult the Problem Solution
Guide on page 29.
to replace the light bulbs, follow these steps:
turn off power to the oven at the circuit breaker or 1.
fuse box.
gently insert the pointed end of the supplied lens pry
2.
stick under the center edge of the lens cover. hold
your hand under the lens for support and pry it loose.
pull the lens cover straight out.
using a glove, insert the new bulb into the socket. 3.
replace the light bulbs only with Dacor part no.
100429, available from any authorized Dacor parts
dealer.
Care and Cleaning
important
Do not touch the replacement halogen light bulbs with
your fingers. Halogen bulbs are sensitive to the oils
from your hand. the oils from your hand will stick to
the bulb and cause it to burn out faster than normal.
when reinstalling the lens, line up the cut-out on the 4.
inside rim with the light socket. gently press it into its
original position.
turn the power to the oven back on at the main power 5.
supply.
reset the clock (see page 8.)
6.
lens Pry
stick
Light
bulb
Light
socket
cutout on inside
rim of lens
Replacing the Light Bulbs