9
Installation Instructions
Assembling the Burners
WARNING
• Never attempt to operate the cooktop with any of the burner parts removed.
• Do not attempt to adjust the burner air mixture settings. All adjustments are preset at the factory.
1. Remove the burner heads, burner rings, burner caps, and grates from their shipping packages.
2. Assemble the burners as shown below. When assembling the burner components, twist each piece back and forth
until it drops completely into place.
• The burners will not function properly unless all of the burner pieces are correctly seated.
3. Gently set the grates on top of the spill tray. Make sure that the rubber feet are placed in the indentations located in
the spill tray.
* The SimmerSear burner head is permanently attached to
the burner base. It cannot be removed by the user.
Burner and Grate Diagram for
DYCT304G and DYCT365G
Single Burner
Assembly
SimmerSear™
Burner Assembly
Igniter
Grate
Burner cap
Burner skirt
Burner head *
Burner head
Burner
base
Wide side down
Line up this
notch with
the igniter
Feet
(bottom view)
Cap cover
Cap cover
