Safety and warning information
Installation safety
WARNING
To reduce risk of fire, electric shock, personal injury, or death, observe these precautions:
•
The cooktop should be installed and properly grounded by a qualified installer, as
specified in this manual. Adjustments and service should be performed only by
qualified installer or service technician.
•
Do not service/modify/replace the cooktop or any part of it unless directed in this
manual. All other service should be performed by a qualified technician.
•
Use only new, flexible connectors when installing the cooktop.
•
Ensure the cooktop's hold-down brackets are properly installed. (See
pg. 26
.)
•
Remove all tape and packaging materials.
•
After unpacking the cooktop, remove all accessories from inside and around it.
(Cautiously handle the heavy grates.)
•
Verify that
no
thing
came loose during shipping.
•
Ensure
the cooktop is correctly installed/adjusted by a qualified service technician or
installer for the type of gas (natural or LP) you will use. For the cooktop to use
LP gas,
a qualified
installer
/technician
must replace every burner orifice with the
provided
LP orifice set, and reverse the GPR adapter. The qualified agency performing
this work shall be responsible for the conversion.
•
Installation must conform
to
local codes or in the
ir
absence,
to
the National Fuel Gas
Code, ANSI Z223.1/NFPA.54, latest edition. In Canada, installation must conform with
the current Natural Gas and Propane Installation Code, CAN/CGA-B149.1, or the
current Propane Installation Code, CAN/CGA-B149.2, and with local codes where
applicable. This cooktop has been design-certified by ETL according to ANSI Z21.1,
latest edition, and Canadian Gas Association according to CAN/CGA-1.1, latest edition.
English
9
