English 43
Maint
enanc
e
Oven door: remove and re-install
Oven door
To remove the oven door
1.
Turn off the oven and let cool.
2.
Fully open the oven door.
3.
Pull the hinge locks away from the
oven body and down toward the door
frame into the unlocked position.
4.
Close the door to 5 degrees from
vertical. This is the removal position.
5.
While holding both sides of the oven
door tightly, lift it up and out until the
hinge arms come clear of the slots at
the bottom of the oven door.
6.
Place the door in a safe location.
WARNING
•
The door is very heavy. Be careful when removing and lifting the door. Do not
lift the door by the handle.
•
Take care when moving the oven door. Improper handling could result in
physical injury.
•
To prevent electric shock, make sure the oven is turned off before removing
the oven door.
To reinstall the door
1.
Firmly grasp both sides of the door at
the top.
2.
With the door set at the same angle as
the removal position (about 5 degrees
from vertical), slide the hinge arms into
the hinge slots at the bottom of the
door.
3.
Open the door fully. If you cannot open
the door fully, the hinge arms are not
set properly in the hinge slots.
4.
Lock the hinge arms by pushing them
up against the front frame of the oven.
5.
Close the door, and make sure it opens
and closes normally.
DOP36T86GLS_DG68-01105F-00_EN+MES+CFR.indb 43
DOP36T86GLS_DG68-01105F-00_EN+MES+CFR.indb 43
2023-02-28 오전 10:27:29
2023-02-28 오전 10:27:29