18
Installation Instructions
Final Installation
Attach Unit to Cabinets (optional)
1. Drill pilot holes (for the wood screws) through the side
trim and into the adjoining cabinet(s).
2. Attach the refrigerator to the adjacent cabinets using
1/8-inch wood screws.
• If a custom side panel will be installed, see the side
panel attachment instructions.
3. After tightening the screws, open and close the
refrigerator door and freezer drawer to check for
interference.
Attach Custom Side Panel (optional)
IMPORTANT:
Dacor is not responsible for additional service
costs charged for removal of customer installed molding or
decorative panels required to service the refrigerator.
1. Attach the side panel to the support board in back and
attach to the refrigerator trim piece in front.
2. See diagrams below.
Full Built-in Installation (Top View)
Side panel
support board
Side panel
Refrigerator
side trim
Refrigerator
Side trim attached to
surrounding cabinet
Built-in Installation with Side Panel (Top View)
Built-in Installation with Side Panel
Support board
cabinet
Side trim attached
to
side panel
side panel
cabinet
Pilot Holes in Side Trim