English
17
Care and maintenance
Care and maintenance
Care and cleaning of the hood.
Cleaning the Stainless Steel and Painted Surfaces
• Regularly use a dry cloth to remove all foreign substances such as dust or water from
the power plug terminals and contact points.
• Clean stainless steel surfaces and Painted Surfaces with a mild solution of dishwashing
liquid and warm water, always wiping with the grain.
(For best results, Dacor recommends you use Dacor Stainless-Steel Cleaner, according
to
package directions).
• Do not clean with abrasive cleaners or abrasive cloths.
• Rinse and dry with a micro-fiber or other soft, lint-free cloth.
• Do not
use
benzene, thinner, or home/car detergent
to clean the hood
.
• Do not spray water onto the hood. This may cause electric shock.
• Do not put fingers or any objects into the hood.
Control Panel
• Clean the control panel with a soft cloth dampe
ne
d with a
mild detergent-hot water
solution.
• Rinse and dry with a soft cloth.
• Exercise caution to avoid introduction of liquids into the area behind the control panel.
• Do not use abrasive cleaners or scrubbers. They may permanently damage the finish or
scrap
e
off the letters and graphics.
WARNING
To avoid the risk of fire/electric shock/personal injury:
• Turn off power to the hood at the circuit-breaker panel or fuse box before cleaning.
• Clean the hood only as directed with the cleaning solutions specified in this manual.
• Thoroughly dry the filter(s) immediately after cleaning.
• Turn off the cooktop/range, and ensure the appliance has cooled sufficiently before
cleaning it and the hood.
• To avoid damaging the fan, do not reinstall damaged filters.
