
Installation
English
15
STEP 4
Install the custom panel (FBI models only (DDW24T999BB/DA))
A
1.
Insert the supplied
rubber skirt (A)
into
the 3 holes at the bottom of the door.
Ø 2
10-12
2.
Put the installation template on the
back of the custom panel and fix it
temporarily using transparent tape.
Note that the rear of the custom panel
will be attached to the dishwasher door.
CAUTION
• The top end of the custom panel must
be aligned with the top end of the
installation template.
• Use a custom panel between 7 lbs and
20 lbs.
3.
Pre-drill the 6 points marked on the
installation template using a 2-pi drill
bit to a depth of 10 -12 mm.
B
C
B
C
4.
Remove the installation template and
tighten the
custom panel fixers (B)
at
the top with
2 screws (C, Ø4 X 20)
as
shown.
DACOR_DW9500M_DD68-00197A-01_EN.indd 15
2017-08-23 8:54:54
Содержание DDW24M999UM
