*1*nn
Where nn represents the PIN/command
mode timeout value 01-99 seconds (10
seconds default)
*2*nn
Where nn represents the voltage free
contact energise time value 01-99 seconds
(2 seconds default)
*3*xxxxyyyy
Where xxxx is the current PIN and
yyyy is the new PIN (xxxx = 1234 default)
*4*n
Where n represents the PIN entry mode
loudspeaker mute status 0 - disabled or 1 -
enabled (1 default)
Example: * 1 * 1 5 = PIN/command timeout set to 15
seconds
Example: * 3 * 1 2 3 4 9 4 2 6 = PIN set to 9426 from
default
ELECTRICAL INSTALLATION
Line Terminal Connections and Selections
When populated, the Terminal block mounted at the back of the
unit is labelled as follows:-
1. Load
2. Load
Connect the load
(0 Volts)
to the terminal block marked 1 and
2.
This is the output from the relay which is energised upon pin
entry.
Page 10
