28
4.Service Technician Manual
Start/Stop
-
Manual switch on - set the controller in “On” state by pressing the [Start]
button.
Note
: It is possible that the device starts automatically, if the program of
the clock is enabled or GSM tele-control “on” command is issued.
- Manual switch off - set the controller in “OFF” state by pressing the
[Stop] button.
Note
: It is possible that the device stops automatically, if the program of the
clock is enabled or GSM tele-control “off” command is issued.
-Automatic start - from the clock, upon reaching a preset time for turning
on, the burner starts automatically.
-Automatic stop - from the clock, upon reaching a preset time for turning
off, the burner turns off automatically.
Note
:
If you want to operate only manually, it is necessary to disable the
timer program.
Description of the displays
1. Basic display, mode”Off”, it is switched on when you press the Start button.
Row 1: Indications of the temperature sensor of 27 ºC, mode off,
and timer status.
If the timer is activated, it is displayed on the screen.
T 27°C Off
13:15
T 27°C Off +Timer
13:15
