DABIR MP Surface Скачать руководство пользователя страница 1

       Corporate Headquarters, Sales & Manufacturing:

Dabir Surfaces, Inc., 7447 West Wilson Ave., Harwood Heights, IL 60706, USA, www.dabir-surfaces.com

Sales Inquiries: 

  

     [email protected], Tel: +1(888)559-3641

Technical Support:

     [email protected], Tel: +1(888)559-3642 

DOC# R02-0006-00054-CA

1

            

 WARNINGS / CAUTIONS:

•  Surfaces are intended to be used ABOVE

 an underlying bed mattress                                                                                                          

with good pressure redistribution properties over the full patient contact area.

•  Always place the Surface ABOVE

 the mattress and cover it with a bed linen.

• 

Surfaces are NOT intended to be used in direct contact with the patient’s skin.

• 

It is the responsibility of the user to secure and protect against patient movement and/or falls. 

• 

Therapy is NOT provided unless the Controller is powered “ON” and the Surface is actively cycling.

• 

To avoid depressurization noise, do NOT unplug Surface connector while System is activated.

• 

It is the responsibility of the user to properly clean and disinfect the System prior to patient use.

®

Surface Installation Guide (D2 Models Only)

Surface Installation

 

1.  Place Dabir Surface onto flat mattress with “THIS SIDE UP” facing up (gray side down) and secure optional corner straps when 

applicable.  (Surface should lay flat when properly installed.)  Hose exit orientation is optional depending on the desired set-up.

 

2.  Place facility supplied linen and incontinence pad(s) over the top of the Dabir Surface and tuck edges underneath the mattress.  

Avoid wrinkles whenever possible to optimize Dabir performance and patient comfort.

Bed Installation Diagram

STEPS 1 & 2:  

Bed Installation

Dabir Surface 

(Gray Side Down)

Surface 

Connector

STEPS 3 & 4:  

Connector Insertion

Important Before You Start:

 

 

THIS IS A “QUICK SET-UP” GUIDE ONLY

Please refer to the 

Dabir Operation / Service Technical Manual

 for full set-up and usage instructions.  Failure to carefully read and 

follow all instructions and safety information may result in decreased product performance or injury.

System Installation - Surface Connections

 

3.  Insert Surface connector as shown.

 

4.  Listen for an insertion “CLICK” to confirm proper connection.

NOTE:  

Therapy

 will start automatically if powered “ON”.

Linen or Fitted Sheet

Dabir Surface

(Gray side down)

Incontinence Pad

Mattress with good pressure 

redistribution properties

Отзывы: