Dabi Atlante New Versa, Руководство пользователя

Страница: 21 / 28

21
PRECAUTIONS, RESTRICTIONS AND WARNINGS
Transport, storage and operation conditions
The equipment must be transported and stored under the following conditions:
- Carefully, so as not to fall or receive impacts.
- With moisture protection, do not expose to rain, water splash or wet floor.
- Keep in a place protected from rain and direct sunlight and in its original packaging.
- When transporting, do not move it on uneven surfaces and protect the packaging from
direct rain and respect the maximum stacking informed on the outside of the packaging.
- Room temperature range for transport or storage -12ºC to + 50ºC.
- Room temperature range recommended by Dabi A 10ºC to + 35ºC.
WARNING: The equipment must be used only with the power input cable supplied by
Dabi Atlante, otherwise it may cause an increase in emissions or a decrease in the
equipment immunity.
The Equipment maintains its safety and effectiveness condition, as long as it is
maintained (stored) as mentioned in this instruction for use. In this way, the
equipment will not lose or change its physical and dimensional characteristics.
Sensitivity to predictable environmental conditions in normal use
situations
- The equipment was designed not to be sensitive to interference such as magnetic
fields, external electrical influences, electrostatic discharges, pressure or pressure
variation, as long as the equipment is installed, maintained, cleaned, stored, transported
and operated in accordance with this instruction for use. .
Precautions and warnings “during equipment installation”
- The equipment must be installed only by authorized Dabi Atlante technicians or
technical assistance.
- Position the unit in a place where it will not be wet.
- Install the equipment in a place where it will not be damaged by pressure,
temperature, humidity, direct sunlight, dust or salts.
- The equipment must not be subjected to inclination, excessive vibrations, or shocks
(including during transport and handling).
- This equipment is not designed for use in an environment where vapors, anesthetic
mixtures which are flammable with air, or oxygen and nitrous oxide can be detected.
- Check the equipment voltage when making the electrical installation.
- Before first use and/or after long work interruptions such as holidays, clean and
disinfect the equipment.
This information is also part of the equipment Installation and
Maintenance Manual that is in the possession of the authorized
technical representative Dabi Atlante.
21