19
Problem
Probable cause
Solution
-The Air motors does not
function.
-The control ring is in the inter-
mediary position between the
counterclockwise and clockwi-
se directions of speed.
-Lack of lubrication or inade-
quatelubrication.
-The connection of the instru-
ment / terminal is loose.
- Bearing damaged.
-Turn the control ring in a
clockwise or counterclockwise
direction.
-Lubricate as per the indica-
tions.
-Tighten the connection.
-Send to the authorized ser-
vice.
-Insufficient speed.
-Lack of air or low air pressure.
-Lack of lubrication or Inade-
quate lubrication.
-Check the air pressure in the
network.
-Lubricate as per the indica-
tions.
-Failure and noise in the func-
tioning.
-Air leakage.
-Lack of lubrication.
-Examine the hoses and con-
nections.
-Lubricate as indicated.
FINAL CONSIDERATIONS
Among the care you have to take with your equipment, the most important is regarding of the spare
parts replacement.
To ensure the lifetime of your device, only replace original spare parts from Alliage. They have the
assurance of the standards and technical specifications required by the Alliage representative.
We call your attention to our authorized resellers’ chain. Only this chain will keep your equipment
constantly new, because it has trained technical assistant and specific tools for the correct maintenance
of your device.
Whenever you need, demand the presence of a Alliage’ technician from the nearest resale, or ask through
the Attendance Service Alliage: + 55 (16) 3512-1212.
EQUIPMENT’S WARRANTY
This equipment is covered by the warranty terms and norms contained in the Warranty Certificate
that accompany the product.
Attention
Upon coming across any problem in operation, follow the instructions below to check and
repair the problem, and/or get in touch with your representative.
Handpieces may be serviced in the field only at the points described below. If they need to
be disassembled, they must be taken to the manufacturer.
INSPECTION AND MAINTENANCE
