19
Problem
Probable cause
Solution
-It does not couple to the mi-
cromotor.
-Micromotor of another system. -Make sure that the con-
nection of the instrument is
compatible with that of the
equipment
-The bur doe not rotate.
-The bur is not suitably fas-
tened.
-Incorrect coupling of the mi-
cromotor.
-Fasten as per instructions.
-Press until fitting it correctly.
-The bur comes loose when
functioning.
-Bur out of measure.
-Bur badly fastened.
-Replace as specified.
-Fasten as per instructions.
-The bur does not go in.
-Bur out of measure.
-Replace as specified.
- The cooling by the spray does
not function.
- Terminal valve closed.
- The holes of the spray are
blocked up.
- Open the terminal valve.
- Carefully unblock the hole of
the spray with a needle.
Note: Do not use dental files or
an exploratory tip.
FINAL CONSIDERATIONS
Among the care you have to take with your equipment, the most important is regarding of the spare
parts replacement.
To ensure the lifetime of your device, only replace original spare parts from Alliage. They have the
assurance of the standards and technical specifications required by the Alliage representative.
We call your attention to our authorized resellers’ chain. Only this chain will keep your equipment
constantly new, because it has trained technical assistant and specific tools for the correct maintenance
of your device.
Whenever you need, demand the presence of a Alliage’ technician from the nearest resale, or ask through
the Attendance Service Alliage: + 55 (16) 3512-1212.
EQUIPMENT’S WARRANTY
This equipment is covered by the warranty terms and norms contained in the Warranty Certificate
that accompany the product.
Attention
Upon coming across any problem in operation, follow the instructions below to check and
repair the problem, and/or get in touch with your representative.
Handpieces may be serviced in the field only at the points described below. If they need to
be disassembled, they must be taken to the manufacturer.
INSPECTION AND MAINTENANCE