14
4.3 Charging Your Devices
After the main power supply is turned on, short press
the DC power switch to use the DC output port. Short
press the DC power switch again to turn off the DC
output port.
P-Boost
This product adopts P-Boost technology, which can supply power for electrical appliances with
a maximum of 3000W, while keeping the output power within 2200W, so as to avoid operation
failure caused by the activation of overload protection. The P-Boost function needs to be
controlled by the Dabbsson APP.
P-Boost Tips
1.
The P-Boost function is not available when the product turns on the AC output while in the
charging state, parallel state or when the P-Boost mode is turned off in the Dabbsson APP.
2.
P-Boost is not applicable for all electrical appliances; it’s incompatible with appliances with
strict voltage requirements and a rated power over 2200W. Appliances with voltage
protection (such as precise instruments) are not supported. P-Boost mode is more suitable
for heating devices. Please conduct your own tests with your devices with P-Boost enabled.
12V DC Output Port
Short Press
12V DC Power Button
12V ON/OFF
FAST CHARGE
PD 100W
10A
30A
4A
DEVICE
IOT RESET
LIGHT ON/OFF
USB ON/OFF
5V 2.4A
PD 30W
AC Output Port
After turning on the main power button, short press
the AC power button to use the AC output port. Press
the button again will turn it off.
When there is no load on the AC output port of this
product, the power will be automatically turned off
after 2 hours. In ECO mode, the AC output load is less
than 5W, the AC switch will be automatically turned off
after 12 hours, and the power will be turned off after 2
hours. In STANDBY mode, you can set the current
output time. When you don’t need it, please turn it off
in time to save power.
AC NO/OFF
Short Press
AC Power Button
AC NO/OFF