DAB EVOSTA 2, Инструкция по установке и обслуживанию

Страница: 32 / 37

ENGLISH
30
12.2 Graphic Display
12.2.1 Luminous segments indicating the pump setting
The pump presents nine setting options that can be selected with the key.
The pump settings are indicated by six luminous segments on the display.
12.2.2 Key for selecting the pump setting
Whenever the key is pressed, the pump setting is changed. A cycle consists of pressing the key ten
times.
12.2.3 Display Operation
Figura 10: Evosta2d Display
The Evosta3 circulator has a display that is able to show the following values.
Height of the selected curve (1-2-3)
Instantaneous power absorption in Watt
Instantaneous head in feet
Instantaneous flow rate in gallon/minut
The values are shown in sequence for 3". Once the viewing cycle is ended, the display switches off and only
the operating mode LED remains lit.
If the selection key is pressed within 10", the display performs 6 viewing cycles, then goes into stand-by.
If the key is pressed again within 10", the display performs 11 more viewing cycles to allow a greater reading
time.