DAB E.SYBOX MINI 3, Инструкция по установке и обслуживанию

Страница: 39 / 681

ENGLISH
GB
36
INDEX
Key 39
Warnings 39
Responsibility 39
1. General 40
1.1 Description of the Integrated Inverter 41
1.2 Integrated expansion vessel 41
1.3 Technical characteristics 42
2. Installation 43
2.1 Vertical Configuration 43
2.1.1 Hydraulic connections 44
2.1.2 Loading operation – Installation above head and below head 44
2.2 Horizontal Configuration 45
2.2.1 Hydraulic connections 45
2.2.2 Orientation of the interface panel 45
2.2.3 Loading operation – Installation above head and below head 46
3. Commissioning 46
3.1 Electrical connections 46
3.2 Configuration of the integrated inverter 47
3.3 Priming 47
4. The keypad and the display 48
4.1 Direct access with a combination of keys 49
4.2 Access by name with a drop-down menu 52
4.3 Structure of the menu pages 52
4.4 Blocking parameter setting by Password 53
4.5 Enabling and disabling the motor 53
5. Meaning of the individual parameters 54
5.1 User Menu 54
5.1.1 Status 54
5.1.2 RS: Rotation speed display 54
5.1.3 VP: Pressure display 54
5.1.4 VF: Flow display 54
5.1.5 PO: Absorbed power display 54
5.1.6 C1: Phase current display 54
5.1.7 SV: Supply voltage 54
5.1.8 SR: Supply range 54
5.1.9 TE: Dissipator temperature display 54
5.1.10 PKm: Pressure measured at suction 54
5.1.11 Operating hours and number of starts 54
5.1.12 PI: Power histogram 54
5.1.13 Output flow meter 54
5.1.14 VE: Version display 54
5.1.15 FF: Fault log display 55
5.2 Monitor Menu 55
5.2.1 CT: Display contrast 55
5.2.2 BK: Display brightness 55
5.2.3 TK: Backlight switch-on time 55
5.2.4 LA: Language 55
5.2.5 TE: Dissipator temperature display 55
5.3 Setpoint Menu 55
5.3.1 SP: Setting the setpoint pressure 55
5.4 Manual Menu 56
5.4.1 Status 56
5.4.2 RI: Speed setting 56
5.4.3 VP: Pressure display 56
5.4.4 VF: Flow display 56
5.4.5 PO: Absorbed power display 56
5.4.6 C1: Phase current display 56
5.4.7 RS: Rotation speed display 56
5.4.8 SV: Tupply voltage 56
5.4.9 SR: Supply range 56
5.4.10 TE: Dissipator temperature display 56
5.5 Installer Menu 56
5.5.1 RP: Setting the pressure fall to restart 56
5.5.2 OD: Type of plant 57
5.5.3 MS: Measuring system 57
5.5.4 AS: Association of devices 57
5.5.5 EK: Setting the low pressure function on suction 58
5.5.6 PK: Low pressure threshold on suction 58
5.5.7 T1: Low pressure delay (function detecting low pressure on suction) 58
5.6 Technical Assistance Menu 58
5.6.1 TB: Water lack blockage time 58
5.6.2 T2: Delay in switching off 58
5.6.3 GP: Proportional gain coefficient 58
5.6.4 GI: Integral gain coefficient 59
5.6.5 RM: Maximum speed 59
5.6.6 AY: Anti Cycling 59
5.6.7 AE: Enabling the anti-block function 59
5.6.8 AF: Enabling the anti-freeze function 59
5.7 Setting low pressure detection on suction 59
5.8 RF: Fault and warning reset 59
5.8.1 PW: Change password 59
6. Protection systems 60
6.1 Description of blockages 60
6.1.1 “BL” Anti Dry-Run (Protection against dry running) 60