manualshive.com logo in svg

DAB DLM-12A, Руководство пользователя, Страница: 12 / 16

Поделиться
Скачать
DAB DLM-12A Скачать руководство пользователя страница 12

 

  

 

 

11 

   

 

DLM-12A / DLM-12SA 

Ordercode: D3223 / D3224  

 
 
One Active Subwoofer & Two Active Satellite Speakers 

 

 
1)  Make your initial connections with all the equipment powered off and ensure that all the main volume 

controls are turned completely. 

2)  Connect one side of signal cable at your mixer into Main Output Left (with II4"Jack or XLR) and the 

other side of the cable into the Input A of the DLM active subwoofer. Repeat for the channel. With the 
second signal cable connected the HIGHPASS A of the subwoofer (input BXLR) to the Line input 
(COMBO) of the active satellite (with Stereo-Jack or XLR). Repeat for the RIGHT channel. 

4)  Connect the power cords to main. 
5)  Turn on your mixer first, then the active speaker cabinets. 
6)  Turn up the volume controls of the active speaker cabinets. 
7)  Use PFL function to get the proper input level for the mixer and adjust the Main Mix Level. 
8)  After using your equipment, turn off your active speaker cabinets first, then the mixer. 
 

 

 

Содержание DLM-12A

















Отзывы:

Нет отзывов