Daan Tech VOLTZ TOYS SX1718 Скачать руководство пользователя страница 24

20

WARNING

•  Do not charge non-rechargeable batteries for the remote.
•  Batteries for the remote must be inserted with the correct polarity.
•  When the remote is low in battery, please remove and swap the batter-

ies.

•  Rechargeable batteries for the remote must be charged under adult su-

pervision.

•  Rechargeable batteries must be removed from the remote before being 

charged.

CHARGING PROCEDURES

•  For safety purposes, charging must be done by adults. 
•  When initially assembled, connect the (red) battery wires under the 

hood. Charge for 8-12 hours before using. 

•  The charging port is located on the dashboard. Follow the instructions to 

charge the battery. 

•  If the car is starting to slow down, this indicates the battery is low. Re-

charge for 8-12 hours, maximum 20 hours. Do not overcharge or under-
charge. 

Changing the remote batteries: 

Unscrew the battery cover using a screw-

driver. Following the arrow, press in the following direction to open the 
cover. Replace the batteries according to their corresponding polarity. 

How to insert batteries: 

Use a screwdriver to unscrew the back cover of 

the remote. Install two AA 1.5V alkaline type batteries according to the dia-
gram (batteries not included). Fix the battery cover with a screw. 

How to remove batteries:

 Use a screwdriver to unscrew the back cover 

of the remote. Open the cover and remove the two AA 1.5V alkaline type 
batteries. Close the battery cover, fix with a screw. 

Содержание VOLTZ TOYS SX1718





























Отзывы: