ASSEMBLY INSTRUCTIONS
NOTE:
It requires two people to assemble this
easel.
1. Place upright “A” on flat surface with thread-
ed holes facing up.
2. Place chalk tray “B” on upright “A”; insert
four (4)
1
/
4
”-20 screws into holes and tighten
with screwdriver.
3. Stand partially assembled frame on casters.
4. Stand upright “C” on casters with holes fac-
ing chalk tray “B”. With four (4)
1
/
4
”-20
screws, attach chalk tray “B” to upright “C”
and tighten with screwdriver.
5. Insert one (1) #14 x 2" screw through top hole
in outisde of upright “A” and “C” and to cen-
ter hole on marker board “D” and tighten for
stability.
6. Insert second #14x2" screw through bottom
hole in upright “A” and “C” and into hole on
marker board “D” and tighten.
7. Your roll-around marker board is now ready for
use.
CASTERS
CASTERS
#14 X 2"
WOOD SCREW
UPRIGHT
“A”
1
/
4
"-20 X
5
/
8
"
MACHINE
SCREW
UPRIGHT
“C”
MARKER BOARD “D”
CHALK TRAY “B”
HARDWARE PACKAGE CONTAINS:
8
1
/
4
- 20 x
5
/
8
" Screws
4
#14 x 2" Screws
