![background image](http://html1.mh-extra.com/html/da-lite/parallax/parallax_instruction-book_495310006.webp)
6
Installation Method 1 (Screens 80" And Smaller In Viewing Width)
1. Secure the wall bracket to wall studs at the desired height.
Make sure the bracket is level. The top of the frame will be
1/8" above the top of the wall bracket when mounted. You will
need at least 5/8" clearance above the bracket to hang the
screen. Figures 5, 6, and 7 show the proper orientation for the
supplied wall brackets.
2. To install the lower wall bracket, you must measure the
overall height of the screen frame and subtract 1-5/8". Using
that dimension, measure down from the top edge of the wall
bracket and mark the wall for two screw holes. The holes
should be centered within the frame and 6" apart. Refer to
Figure 6.
3. Attach the small wall bracket to the wall. Refer to Figure 7 for
proper orientation. Do not tighten the screws completely. The
bracket should slide up and down easily.
4. Position the screen with the attached surface onto the top
wall bracket. Push down at the center
of the bottom frame rail to hook onto the lower wall bracket.
Refer to Figure 7.
Figure 5
Small Wall Bracket
1-Piece
Large Wall
Bracket
1-Piece
Figure 7
1
Lift
3
2
W
all
Installation
There are three methods of installation based on the size of the
screen. Measure the width of the viewing area of your screen
and refer to the appropriate method of installation below. The
wall bracket diagram shows the type and quantity of bracket(s)
supplied based on the size of the screen.
Method 1: Screens 80" and smaller in viewing width.
Method 2: Screens over 80" up to 96" in viewing width.
Method 3: Screens over 96" in viewing width.
Figure 6
Large Wall Bracket
6"
Small Wall Bracket
Overall Height Less 1 5/8"
Overall
Height
Содержание Parallax
Страница 1: ...INSTRUCTION BOOK FOR Parallax Screen ...