SUGGESTED METHODS OF INSTALLATION
Offset mounting, recessed above ceiling. For plaster, dry wall,
tile or paneling. Bottom of case painted same finish as ceiling.
Offset mounting, recessed above ceiling. May be adapted for
3/4" ceiling, but cut to 1/4" thick under screen case and panel.
Offset mounting, recessed above ceiling. May be adapted for
1/4" paneling for ceiling.
Flush mounting, recessed above ceiling. For use with dropped
ceiling. May also be adapted for use with acoustical or other
ceiling 3/4" thick but cut to 1/4" thick under screen case and panel.
METHOD A
METHOD B
METHOD C
METHOD D
5
SELECT INSTALLATION METHOD ACCORDING
TO CEILING TYPE.
NOTE: MUST MARK HOLE LOCATION OF SCREWS IN
3-1/2” PANEL FOR REMOVAL,
IF COVERING WITH TILE.
CASE LENGTH = SCREEN FABRIC WIDTH
+ 13-1/2”, ALL SIZES
1-1/2”
MOUNTING BRACKET
MOTOR END
CONTROL WIRE OUTLET
6-3/4”
(SUGGESTED)
1/4” LAG SCREWS
1-1/2”
1-1/2”
MOUNTING JOIST
3/4” FINISHED CEILING
3/8” STEEL SLAT IN POCKET
PICTURE SURFACE
FURRING
STRIP
8-11/16”
8-13/16”
9-1/4”
9”
MOUNTING BRACKET
MASKING SURFACE
1/4” X 1” ALUM BAR IN POCKET
CAN BE PAINTED SAME AS CEILING OR
REMOVED AND PLACED WITH FINISHED CEILING
3-1/2”
PANEL
(SUGGESTED)
1/4” LAG SCREWS
1-1/2”
1-1/2”
MOUNTING JOIST
3/4” FINISHED CEILING
3/8” STEEL SLAT IN POCKET
PICTURE SURFACE
FURRING
STRIP
8-15/16”
9-1/16”
9-1/4”
9”
MOUNTING BRACKET
MASKING SURFACE
1/4” X 1” ALUM BAR IN POCKET
CEILING TILE CUT TO 1/4” THICK
(ATTACH WITH MASTIC)
3-1/2”
PANEL
ELECTRICAL OUTLET
ON THIS END OF CASE
6-3/4”
8-11/16”
9”
(SUGGESTED)
1/4” LAG SCREWS
1-1/2”
1-1/2”
MOUNTING JOIST
FINISHED CEILING
3/8” STEEL SLAT IN POCKET
PICTURE SURFACE
FURRING
STRIP
8-15/16”
9-1/16”
9-1/4”
9”
MOUNTING BRACKET
MASKING SURFACE
1/4” X 1” ALUM BAR IN POCKET
3-1/2”
PANEL
1-1/2”
1-1/2”
(SUGGESTED)
1/4” BOLTS
MOUNTING JOIST
SUSPENDED
CEILING TILE
3/8” STEEL SLAT IN POCKET
PICTURE SURFACE
FURRING
STRIP
8-15/16”
9-1/16”
MASKING SURFACE
1/4” X 1” ALUM BAR IN POCKET
3-1/2”
PANEL
T-BAR
FURNISHED WITH CEILING
Содержание HORIZON ELECTROL
Страница 8: ...7 Printed in U S A 83472 Rev 12 07 ...