3
TO USE WITH PORTABLE FLOOR STAND
NOTE: CAN ONLY BE USED WITH FLOOR MODEL C. WALL SCREENS WILL NOT OPERATE CORRECTLY.
1. Assemble stand according to instructions.
2. Lay screen in cradle of stand with pull bail up.
3. Lift surface by pull bail and hook pull bail over gooseneck of elevating support.
4. Raise upper handle of elevating support until it locks in top position.
5. Raise lower handle of elevating support until full picture area is obtained and locked in position. No stretching, no
straining.
6. Stand may be placed on table if extra height is needed.
HANGING BRACKETS
(Optional at extra cost)
MODEL C
FLOOR STAND
No. 11 Wall Bracket
Non-Adjustable permits
screen to extend 10" or
14" from wall.
No. 6 Wall Bracket
Non-Adjustable permits
screen to extend 6"
from wall.
DA-LITE IS MORE THAN PROJECTION SCREENS
Da-Lite Tripod, Wall and
Ceiling and Electric Screens
Da-Lite Lecterns
Da-Lite
Project-O-Stands
and Easels
Da-Lite
Mounting Systems
Printed in U.S.A.
46422 Rev. 11/08
