3
To Lower Picture Surface
Pull screen down all the way. HESITATE – then allow screen to retract VERY SLOWLY until it locks in place.
To Raise Picture Surface
Pull down on the pull bail, then release quickly. The screen will retract
gently into the case.
To Adjust Retraction Speed
Use a large flat screwdriver to turn the adjustment knob on the right
end of the screen. To increase the travel speed turn counterclockwise.
To decrease the travel speed turn clockwise. Adjustments should be
made in half turn increments and travel speed checked before
adjusting further.
NOTE:
This feature is not available on some large screen sizes.
Call the factory for adjustment instructions.
If screen locks at the bottom and will not retract, turn adjustment
knob one quarter turn counterclockwise.
Operating Instructions
Screen Accessories
T-Bar Clip
For Dropped Ceilings
50 lb. max. load capacity.
No. 23 Adjustable
Wall Brackets
Screen can be extended 10", 14",
15
3
⁄
4
", 18
1
⁄
4
", 20" or 24" from wall
by wing nut and bolt`
adjustment.
No. 11 Wall Brackets
Screen can be extended
10" or 14" from wall by
changing position
of bracket.
No. 6 Wall Brackets
Screen can be extended
6" from wall.
Tilt Lock
For Keystone Elimination
Holds back bottom of
screen in tilted position
to eliminate keystoning.
Wall Brackets (75# Per Pair Maximum)
Da-Lite No. 6 and No. 11 Non-adjustable wall brackets and
No. 23 adjustable extension wall brackets are ideal for keystone
elimination, clearance, or corner mounting. The screen
brackets should be fastened to the studding or other
solid surface and not in the plaster only. Suspend
screen from “D” rings.
