Steps:
1. Lay out & account for all components
2. Place legs next to corresponding sized table
tops. Ie. Large Tabletop with 3 Large Legs,
Medium Tabletop with 2 Medium Legs.
3. Attach the legs to the tabletops using Hex
Screws & Hex Key
4. Start with the Large Tabletop/Legs upside
down so the legs are sticking up into the air.
Lower 1 Collar onto the middle leg of the large
table, following by 1 Bearing Spacer, 1 Bearing
Ring, and 1 more Bearing Spacer.
5. Lower the Medium Tabletop/Legs onto the
large table - with the middle leg of the large
table sliding through the hole in the middle of
the medium tabletop
6. Place 1 Bearing Spacer, 1 Bearing Ring, and 1
more Bearing Spacer on the same center leg.
Next, lower 1 Collar onto the leg, followed by 1
Bearing Spacer, 1 Bearing Ring, and 1 more
Bearing Spacer.
7. Lower the Small Tabletop/Legs over the
center leg.
8. Open and attach the Clamp Ring directly
under the bottom of the small tabletop. Secure it
in order to keep all the layers on the center leg in
place.
9. Attached Floor Levelers and Wheels
10. Flip the assembly over and place the extra
Small Leg/Tabletop to the top of the Large Table.
*Please Note:
Two person assembly is reccomended.
The Bearring Rings are oiled for mobility.
extra small
*Not to scale
large
medium
small
collar
collar
bearing ring
& spacers
clamp
ring
