D.T.Systems SUPER TRAINER EDT 100, Руководство пользователя

Страница: 13 / 20

13
The batteries come partially charged from the factory. It
is, however, recommended that you give the battery a full
charge before the first use. This takes about 14 hours.
Remember - Always keep batteries away from flammable
substances (especially when charging).
When storing the unit for long periods remember to
regularly give the batteries a full charge (14 hours). This
should be done once every 4 to 6 weeks.
Battery Charging Procedure
1. Turn off the power on the
receiver.
2. Plug the charger into a 110 Volt
outlet. (A 220 Volt European
charger is available from D.T.
Systems)
3. Charge both batteries
(transmitter and receiver) for 14
hours. This can be done
separately or simultaneously.
4. After charging, disconnect the
battery charging cables from the
receptacles and securely replace
the rubber battery receptacle
covers on both the transmitter and
the receiver.
5. Test the unit to make sure that it
is working properly.
BATTERIES CONT.