17
You must install a 9V battery in Transmitter and Remote
Receiver before using the Remote Launcher. Use only
Alkaline batteries from major brand name manufacturers.
Generic brands may not work with these units.
INSTALLING BATTERIES
Installing Transmitter Battery
1. Push in the “PUSH” at the top of the
Battery Cover and slide down to
open.
2. Insert a 9V Alkaline battery with the
negative terminal on the left and the
positive terminal on the right as indi-
cated on the diagram in the battery
compartment.
3. Slide Battery Cover back into place
until it is securely closed.
Installing Remote Receiver Battery
NOTE
- Instructions on removing and installing Remote
Receiver unit can be found on p. 16.
1. Remove Remote Receiver from Launcher Base.
2. Slide the Battery Cover off the Remote Receiver.
3. Connect 9V Alkaline battery to the Battery Connector.
4. Place 9V battery into Battery Compartment.
5. Slide Battery Cover back into place until it is securely
closed.
6. Replace Remote Receiver in Launcher Base.
WARNING - Do not remove/install battery while
Launcher is loaded with a Power Load.
