The Light Weight Engine Houtekietstraat 11
B-8540 Deerlijk, Belgium
EFFECTIVITY
page 41
ALL
19-3-2019
OVERHAULS
Major inspections at TBO
is to be performed by the manufacturer or approved service
centres only. For Major Overhaul the engine is to be sent with its logbook and ECU to the
manufacturer or the nearest approved service centre. The recommended time between
overhaul (TBO) is at present 1500 hours of operation. An increase of TBO due to field
experience will be published in the Service Bulletins of the manufacturer D-Motor.
Major repairs and major modifications
are also only to be performed by the manufacturer
or by approved service centres, which are authorized by the manufacturer. In case of prop
strikes or sudden stoppage, the engine must be disassembled and the crankshaft must be
checked for cracks. This is considered a major repair and must be performed by the
manufacturer or an approved service centre.
