D-MAX DMX-25632, Руководство пользователя

Страница: 22 / 28

- 22 -
5.1. CAUTION IN USE
1. Please turn off the power before installing.
2. Please check the power after installing the system.
3. The condition of operating the system is 5
℃
~ 50
℃
.
4. Please be careful to shock and impact to the equipment, cause damage and failure.
5. Avoid a location in sunshine directly and heater for installing.
6. When change fuse, it must be turn off the power and plug out.
5.2. TROUBLE SHOOTING
제 5 장 제품 외
관도
STATUS CHECK POINT TROUBLESHOOTING
The power does not turn on. Can the power is put normally?
After check the power source and turn on the
power switch again.
It can not be operated on power. Does the keyboard is accessed normally? Check connection with keyboard.
It can not be displayed each camera in
order on the monitor. Is the number of camera on the BNC correct
to real number of camera?
Check number of input camera on the BNC of
the rear panel for real number of camera.
There is no video output on the special
monitor.
Does the video CARD (DVC-6432) put in the
related number of slot? Check the video cars put on the slot and put it
tight again.
Does the BNC cable is access to the related
monitor?
Check the BNC cable to connect with the
related monitor and check the power is on for
monitor and VCR.
One of all cameras doesn’t display on
the monitor.
Does not view of this camera on the all
monitor? Check status between camera and matrix and
whether the power is on for this camera.
Does not view of this camera on the special
monitor?
Put the related video card again.
Does not work PAN/TILT movement?
Do the data cables have connected normally?
(+/-) Check a polarity of the data cable and
connection condition.
The camera number of controller is correct
with RX number?
Set up number R/X or controller again.
5. CAUTION & TROUBLE SHOOTING