D-MAX DCC-500D, Руководство пользователя

Страница: 8 / 16

- Please position the arrow to point to
'BACKLIGHT' on the SETUP menu by
using the UP and DOWN buttons.
- Please select the mode you wish to
operate by pressing the LEFT or RIGHT
button.
HIGH : The gain increases from 0dB up to 42dB.
MIDDLE : The gain increases from 0dB up to 30dB.
LOW : The gain increases from 0dB up to 18dB.
OFF : BACKLIGHT function does not operate.
Please select one of the 3 modes below.
- ATW(Auto Tracking White Balance) : This mode can be used
within the color temperature range 1,800 K ~ 10,500 K (eg,
fluorescent light, outdoor, sodium vapor lamp or inside tunnels)
- AWC(Auto White Balance Control) : Please press the SETUP
button while the camera is directed at a piece of white paper to
obtain the optimum state under current illumination. If the
environment including the light source is changed you have to
adjust the white balance again.
- MANUAL : The manual adjustment mode enables finer
adjustment.
Please select ATW or AWC first. Please change to manual
adjustment mode and press the SETUP button. Please set the
appropriate color temperature, and then increase or decrease the
red and blue color values while monitoring the color changes on
the object.
4) BACKLIGHT
When there is a strong backlight behind the object, clear images of
the background as well as the object can still be obtained by using
the backlight function.
12 13
SETUP
LENS MNUAL
SHUTTER
ESC
WHITE BAL ATM
BACKLIGHT OFF
AGC LOW
DNR LOW
SENS-UP OFF
SPECIAL
EXIT