D-M-E Pro Weld Скачать руководство пользователя страница 2

Страница: 2 / 52

D-M-E Company
29111 Stephenson Highway
Madison Heights, MI 48071

Phone:
(800) 626-6653 (248) 398-6000
Fax:
(248) 398-6174

D-M-E Pr

W
eld

™

User Guide

PREFACE

Please read this instruction manual thoroughly before using
your D-M-E Pro Weld

™

system.

The D-M-E Pro Weld unit is a newly developed resistance-
type micro-welding machine. It is powerful enough to weld
0.3mm thick metal sheets and has a wide selection of weld-
ing materials in sheet, wire and powder form to choose from.

Applications

♦

Welding can be made to steel molds and dies for plastics,
rubber, die casting, and compression molds.

♦

Welds can be applied on as-rolled steel, pre-hardened
steel, quenched and tempered steel, free cutting steel,
stainless steel, and others.

♦

To build up parting lines, mold seams, 3-point corners
and edges.

♦

To fill in pores, repair of pinholes.

♦

To repair wear, worn areas on slides, ejector pins,
sharp edge molds, and thin core parts.

♦

To design modification of inserts and cores.

♦

To add a radius to an inner corner due to a
design change.

♦

To repair the shrinkage that occurs after argon arc
and TIG welding.

♦

To repair damage due to overgrinding, from an
end mill or EDM process.

Содержание Pro Weld





















































Результаты поиска

Содержание Pro Weld

Отзывы:

D-M-E Pro Weld, Руководство пользователя, Страница: 2 / 52

Результаты поиска

Содержание Pro Weld

Отзывы: