D-Link xtreme n duo dap-1522 Скачать руководство пользователя страница 2

Страница: 2 / 4

Reset the DAP1522

Reset your DAP1522 to factory settings using the following procedure:

1. Switch your D-Link unit to Bridge

Bridge mode using the switch on the back (the wireless bridge

should always be in bridge mode at competition)

2. Plug in the power and Ethernet connections

3. Wait for the either the orange Bridge light or blue Access Point light to begin flashing

4. Hold the reset button (on the back of the unit) for 10 seconds then release

5. Wait for the light to stop flashing (this signals the wireless bridge is starting to reset)

6. Wait for the light to resume flashing, your wireless bridge is now reset

Connect the wireless bridge to your computer using an Ethernet

Ethernet cable

Connect to the Bridge

Start Internet Explorer and type in an address of 192.168.0.50

192.168.0.50

• Username = admin

admin

Manual Radio Configuration

Page 2

Manual Radio Configuration Last Updated: 01-06-2017

Содержание xtreme n duo dap-1522

Страница 1: ...dapter Settings Change Adapter Settings 3 Right click Right click on the appropriate adapter typically Local Area Connection and select Properties Properties 4 Click on the Internet Protocol Version 4...

Страница 2: ...begin flashing 4 Hold the reset button on the back of the unit for 10 seconds then release 5 Wait for the light to stop flashing this signals the wireless bridge is starting to reset 6 Wait for the l...

Страница 3: ...k Name to your team number 2 Set th Wireless Security Mode Wireless Security Mode to WPA Personal WPA Personal 3 Set the WPA Mode WPA Mode to WPA2 Only WPA2 Only and the Cipher Type Cipher Type to AES...

Страница 4: ...tings from the left sidebar 1 Set the IP to 10 xx yy 1 where XXYY is your team number 2 Set the Subnet Mask to 255 0 0 0 3 Set the Default Gateway to 10 xx yy 4 4 Click Save Settings Save Settings Man...