xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
354
45
C
OMMAND
H
ISTORY
L
IST
The command history list commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command Parameters
? {<command>}
show command_history
config command_history <value 1-40>
Each command is listed, in detail, in the following sections.
?
Purpose
Used to display all commands in the Command Line Interface
(CLI).
Syntax
? {<command>}
Description
This command will display all of the commands available
through the Command Line Interface (CLI).
Parameters
{<command>}
– Entering the question mark with an appropriate
command will list all the corresponding parameters for the
specified command, along with a brief description of the
commands function and similar commands having the same
words in the command.
Restrictions None.
Example usage
To display all of the commands in the CLI:
DGS-3324SRi:4#?
..
?
clear
clear arptable
clear counters
clear fdb
clear log
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config 802.1x reauth
config access profile profile_id
config account
config admin local_enable
config all_boxes_id
config arp_aging time
config authen_application
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
Example usage:
