DGS-3200 Series Layer 2 Gigabit Managed Switch CLI Manual
148
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g s t p i n s t a n c e _ i d 2 a d d _ v l a n 1 t o 3
C o m m a n d : c o n f i g s t p i n s t a n c e _ i d 2 a d d _ v l a n 1 t o 3
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
To remove a VLAN ID from an MSTP instance:
D G S - 3 2 0 0 - 1 0 : 4 # c o n f i g s t p i n s t a n c e _ i d 2 r e m o v e _ v l a n 2
C o m m a n d : c o n f i g s t p i n s t a n c e _ i d 2 r e m o v e _ v l a n 2
S u c c e s s .
D G S - 3 2 0 0 - 1 0 : 4 #
16-8 config stp mst_config_id
Purpose
Used to change the name or revision level of the MST configuration identification.
Format
config stp mst_config_id { name <string> | revision_level <int> }
Description
To configure a configuration name or revision level in the MST configuration identification. The default
configuration name is the MAC address of the bridge.
Parameters
Parameters
Description
name
The name given for a specified MST region.
revision_level
The same given name with a different revision level also represents a
different MST region.
Restrictions
You must have administrator privilege.
Examples
To change the name and revision level of the MST configuration identification:
