D-Link WNA-1330 страница 53 Скачать руководство пользователя

Страница: 53 / 70

D-Link WNA-1330 User Manual

Section 5 - Troubleshooting

Make sure that the WNA-1330 Wireless Adapter is properly seated in the computer’s Cardbus slot.

If Windows does not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that were previously

loaded.

2. The computer does not recognize the WNA-1330 Wireless Adapter.

• Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may be a problem

with the broadband connection.

• Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC power and

Ethernet cables are firmly connected.

• Check that the IP Address, subnet mask, gateway, and DNS settings are correctly entered for the network

• In

Infrastructure

mode, make sure the same

Service Set Identifier

(SSID)

is specified on the settings for the wireless

clients and access points. The

SSID

factory default setting for D-Link products is

default.

(Double-click on the WLAN

icon in the taskbar. The

Link Info

screen will display the SSID setting.)

• In

Ad-Hoc

mode, both wireless clients will need to have the same

SSID

. Please note that it might be necessary to

set up one client to establish a

BSS (Basic Service Set)

and wait briefly before setting up other clients. This prevents

several clients from trying to establish a

BSS

at the same time, which can result in multiple singular

BSSs

being

established, rather than a single

BSS

with multiple clients associated to it.

Check that the

Network Connection

for the wireless client is configured properly. Select

AP (Infrastructure)

when connecting to an

access point and select

Ad-Hoc mode

when connecting without an access point. Double-click on the

WLAN

icon

in the taskbar >

3. The computer with the WNA-1330 installed is unable to connect to the wireless network and/or the Internet.

Содержание WNA-1330







































































Результаты поиска

Содержание WNA-1330

Отзывы:

Похожие инструкции для WNA-1330

Бренды по названию

Популярные бренды

D-Link WNA-1330, Руководство пользователя

Результаты поиска

Содержание WNA-1330

Отзывы:

Похожие инструкции для WNA-1330

Бренды по названию

Популярные бренды