Ph: 1300 650 679
www.livingnetworks.net.au
2.
Next, you must install an ADSL filter and connect the modem to your
telephone socket.
Our Filters look like this:
One is included in the box with the modem.
A.
plug the Filter adaptor into the wall socket, in the port marked “LINE”
B.
plug the ADSL modem into the filter, in the port marked “DSL”
C.
If you have a telephone, plug it into the port marked “PHONE”
NOTE
: It is important that you install a filter in every telephone socket where a telephone is
connected. If you have a second telephone handset plugged into another socket, you will need
another FILTER. Please contact us for details.
3.
The Router must be used with the power adapter included with the device.
•
Insert the AC Power Adapter cord into the power receptacle located on the
rear panel of the Router and plug the adapter into a suitable nearby power
source.
•
Push down the Power button, and you should see the Power LED indicator
light up and remain lit.
•
If the Ethernet port is connected to a working device, check the Ethernet
Link/Act LED indicators to make sure the connection is valid.
4.
Once connected, set your PC’s IP settings to DHCP
