D-Link UNIFIED WIRED & WIRELESS ACCESS SYSTEM..., Руководство по настройке

Страница: 47 / 192

CLI Example 47
5 Trunking (Link Aggregation)
(DWS-3024) #show port-channel all
Port- Link
Log. Channel Adm. Trap STP Mbr Port Port
Intf Name Link Mode Mode Mode Type Ports Speed Active
------ ------------- ----- ---- ---- ------ ------- ------ --------- ------
3/1 lag_10 Down En. En. Dis. Dynamic
3/2 lag_20 Down En. En. Dis. Dynamic
Example 2: Add the physical ports to the port-channels:
(DWS-3024) #config
(DWS-3024) (Config)#interface 0/2
(DWS-3024) (Interface 0/2)#addport 3/1
(DWS-3024) (Interface 0/2)#exit
(DWS-3024) (Config)#interface 0/3
(DWS-3024) (Interface 0/3)#addport 3/1
(DWS-3024) (Interface 0/3)#exit
(DWS-3024) (Config)#exit
(DWS-3024) #config
(DWS-3024) (Config)#interface 0/8
(DWS-3024) (Interface 0/8)#addport 3/2
(DWS-3024) (Interface 0/8)#exit
(DWS-3024) (Config)#interface 0/9
(DWS-3024) (Interface 0/9)#addport 3/2
(DWS-3024) (Interface 0/9)#exit
(DWS-3024) (Config)#exit
Example 3: Enable both port-channels:
By default, the system enables link trap notification
(DWS-3024) #config
(DWS-3024) (Config)#port-channel adminmode all
(DWS-3024) (Config)#exit
At this point, the LAGs could be added to the default management VLAN.