D-Link SECURICAM DCS-6511, Быстрое руководство по установке

Страница: 6 / 128

D-Link DCS-6511 Quick Installation Guide 4
E
N
G
LI
S
H
Connecting the Optional Cable Harness
Remove the sun shield by lifting it off of the camera.
Use the included security wrench to remove the 4
screws from the top of the camera, then remove the
camera cover.
Remove a waterproofing plug from the side or bottom
of the camera depending on how you want the cables
to exit the camera.
Connect the camera connector to the camera.
Reattach the camera cover using the security wrench
to tighten the 3 screws, and reattach the sun shield.
Push the camera connector and cable through the
hole, and insert the cable's waterproofing plug.
Make sure the plug is inserted properly to ensure a
good seal.
For side cable exit:
Attach the side cover via the provided screws.
Slide the cover over the cable ports.
For bottom cable exit:
Attach the protective side cover via the provided
screws.