Appendix B - Reset and Restore
85
D-Link DCS-3415 User Manual
Reset and Restore
Restoring the factory defaults will result in
the loss of any previous settings and will
require running the Installation Wizard to
return the
DCS-3415
to a normal state.
RESET
:
1. Lightly insert a paper clip (or a similar sized tool) into the reset
hole on the back of the camera, press lightly and then release the
button.
. The LED on the front of the camera will begin blinking red and
green.
3. When the LED stops the blinking the reset has completed.
RESTORE
:
1. Insert the paperclip or other tool and hold the button in.
. Wait for the LED on the front of the camera to blink red and green
and hold the button for 30 seconds.
3. Withdraw the tool after the second cycle of the LED blinking and
a factory restore has been completed.
Reset button
There is a button hidden in the pinhole beside the Ethernet port. It is used to
reset
the system or
restore
the factory
default settings. Sometimes resetting the
DCS-3415
will return the system back to a normal state. If the system still
has problems after reset, restore the factory settings and install again:
Содержание Securicam DCS-3415
Страница 1: ......
Страница 71: ...71 D Link DCS 3415 User Manual Section 4 Configuration Help ...
