D-Link PC DE-220P, Руководство по установке

Страница: 16 / 24

DE-220P Series Ethernet Adapter / User’s Guide
---------------------------~~~~~~~
run the diagnostic routines
of setup.
exe program t o
test the configuration.
Single-Adapter Installation
1 .
2 .
3 .
4 .
5 .
Shut down the computer, unplug its power cord,
and remove the chassis cover.
Insert the DE-220P Series card into the connector
of any open ISA expansion slot. You may choose
either an 8-bit or l6-bit, expansion slot,. A l6-bit,
slot, will provide better network performance. As-
certain that, the card is fully seated in the
expansion slot connector.
Install the bracket, screw which secures the card
to the computer chassis.
Replace the cornputer’s chassis cover.
For non-PnP systems, configure the DE-220P Se-
ries adapter by running the supplied setup
program,
setup.
exe. (For PnP-compliant sys-
tems, this step is fully automated and requires no
action.)
2-8
Installation