D-Link Nuclias Connect Hub Plus DNH-200, Быстрое руководство по установке

Страница: 4 / 16

2
DNH-200 Quick Installation Guide
ENGLISH
# LED Status Color and Behavior
1
Power
LED
Power on Green: solid
System booting
1.Green : blinking when device is
booting (Normal Speed)*
2.Red : solid red when device is boot fail
System Ready Green: solid
Firmware
Update Red and Green: blinking in
sequence (Normal Speed)*
Recovery mode Red: blinking (Normal Speed)*
Uplink and IP
provision
Orange: blinking (Normal Speed)*
The uplink is not established or broken.
During IP provisioning or a failure of
IP provisioning
Power Off Light off
2
HD
LED
While connect
to HDD
Green: solid
While HDD
Read/Write
Green: blinking (Normal Speed)*
HDD power off Light off
Hard Drive Fail Red: solid
3
SSO
LED Connect to
Nuclias Server
1. Light Off : when device does not
connect to Nuclias server with an
SSO account
2. Blue : solid, when device connect to
Nuclias server with an SSO account
Table 1: LED Description
Package Contents
This DNH-200 package includes the following
items:
• DNH-200 Nuclias Connect Hub Plus
• Power adapter
• Rack Mount Kit
• Ethernet cable
• Documentation
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
System Requirements
• Computers with Windows®, Macintosh®, or
Linux-based operating systems
• Browser support for H.264 video stream
Microsoft Edge/Chrome/Safari/Firefox
• Browser support for H.265 video stream
Microsoft Edge/Safari
Hardware Overview
LED Indicators
Figure 1: Front Panel LED
1 2 3
* Normal speed = 1 second On, 1 second Off