D-Link NUCLIAS CONNECT DAP-2680, Быстрое руководство по установке

Страница: 5 / 48

D-Link DAP-2680 Quick Install Guide
3
E
N
G
LI
S
H
Power Receptor
(*Note no longer
used, replaced
by PoE)
LAN Port (PoE)
Power on the access point
To power on the DAP-2680, you can use ONE of the following methods:
1. Plug one end of your Ethernet cable into the LAN port of the DAP-2680, and the
other end into a port on a 802.3at PoE switch.
2. Purchase separately a DPE-301GI PoE injector if you need to connect the Access
Point without a 802.3at PoE Switch.
Configure the access point
To set up and manage the DAP-2680, use one of the following methods:
1. Connect the access point and your computer to the same switch. Manage the
access point from the computer.
Enter 192.168.0.50 in the address field of your browser, which is the default IP
address of the access point.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: (Leave the password field blank)
2. Connect the access point and your computer via DPE-301GI. Manage the access
point from the computer.
Ensure your computer is configured with a static IP address in 192.168.0.0/24 subnet.
Launch a web browser, type the default IP address of the access point
(http://192.168.0.50) and then press Enter.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: (Leave the password field blank)
3. Installation
OR
Computer
802.3at PoE Switch
DAP-2680
Computer
PoE Injector
Power
Adapter