D-Link nuclias connect DAP-2662 Скачать руководство пользователя

Страница: 18 / 95

Web User Interface

Wireless Band:

Mode:

Network Name (SSID):

SSID Visibility:

Auto Channel Selection:

Channel:

Channel Width:

Site Survey:

Authentication:

Select either 2.4 GHz or 5 GHz from the drop-down

menu.

Wireless Client is selected from the drop-down menu.

Service Set Identifier (SSID) is the name designated

for a specific wireless local area network (WLAN). The

SSID’s factory default setting is dlink. The SSID can

be easily changed to connect to an existing wireless

network.

This option is unavailable in Wireless Client mode.

Enabling this feature automatically selects the channel

that will provide the best wireless performance. This

feature is not supported in Wireless Client mode.

The channel used will be displayed, and matches the

AP that the DAP-2662 is connected to when set to

Wireless Client mode.

Use the drop-down menu to choose 20 MHz or Auto

20/40 MHz.

Click on the

Scan

button to search for available

wireless networks, then click on the available network

that you want to connect with.

Will be explained in the next topic.

Wireless Client Mode

Содержание nuclias connect DAP-2662
































































































Результаты поиска

Содержание nuclias connect DAP-2662

Отзывы:

Похожие инструкции для nuclias connect DAP-2662

Бренды по названию

Популярные бренды

D-Link nuclias connect DAP-2662, Руководство пользователя

Результаты поиска

Содержание nuclias connect DAP-2662

Отзывы:

Похожие инструкции для nuclias connect DAP-2662

Бренды по названию

Популярные бренды