D-Link NetDefend DFL-1660 Скачать руководство пользователя страница 401 | Manualshive

Страница: 401 / 595

background image

server which then performs the authentication and sends back a bind response with the result.

Figure 8.1. Normal LDAP Authentication

The processing is different if a group membership is being retrieved since a request is sent to the
LDAP server to search for memberships and any group memberships are then sent back in the
response.

B. PPP Authentication with CHAP, MS-CHAPv1 or MS-CHAPv2 Encryption

If PPP with CHAP, MS-CHAPv1 or MS-CHAPv2 is used for authentication, a digest of the user's
password will be sent to NetDefendOS by the client. NetDefendOS cannot just forward this digest
to the LDAP server since this won't be understood. The solution is for NetDefendOS to obtain the
password in plain-text from the LDAP server, create a digest itself, and then compare the created
digest with the digest from the client. If the two are the same, authentication is successful but it is
NetDefendOS that makes the authentication decision and not the LDAP server.

To retrieve the password from the LDAP server, two things are needed:

•

The Password Attribute parameter needs to be specified when defining the server to
NetDefendOS. This will be the ID of the field on the LDAP server that will contain the
password when it is sent back.

This ID must be different from the default password attribute (which is usually userPassword
for most LDAP servers). A suggestion is to use the description field in the LDAP database.

•

In order for the server to return the password in the database field with the ID specified, the
LDAP administrator must make sure that the plain text password is found there. LDAP servers
store passwords in encrypted digest form and do not provide automatic mechanisms for doing
this. It must therefore be done manually by the administrator as they add new users and change
existing users passwords.

This clearly involves some effort from the administrator, as well as leaving passwords
dangerously exposed in plain text form on the LDAP server. These are some of the reasons why
LDAP may not be viewed as a viable authentication solution for CHAP, MS-CHAPv1 or
MS-CHAPv2 encrypted PPP.

When NetDefendOS receives the password digest from the client, it initiates a Search Request to the
LDAP server. The server replies with a Search Response which will contains the user's password
and any group memberships. NetDefendOS is then able to compare digests. The diagram below
illustrates this process.

8.2.4. External LDAP Servers

Chapter 8. User Authentication

401

«
...
399
400
401
402
403
...
»

Содержание NetDefend DFL-1660




















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для NetDefend DFL-1660

Бренд: Tandberg Data Страницы: 67

Бренд: Infoblox Страницы: 16

M86 IR Enterprise Reporter

Бренд: M86 Security Страницы: 110

Бренд: Juniper Страницы: 13

Бренд: Nexcom Страницы: 53

Бренд: IBM Страницы: 7

CAR-5040 Series

Бренд: Caswell Страницы: 134

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды