13
D-Link DNR-322L User Manual
Section 3 - Installation
Power and Device Selection
First, connect the power adapter to the power receptor on the back of the
NVR. Press the power button located under the faceplate LEDs to turn on
the NVR. Click
Next
on the Setup Wizard to continue.
Select your device from the device selection area. A confirmation window
will appear asking you to check if the device’s Power LED is solid. If it is
solid, select
Yes
in the confirmation window. Otherwise select
No
. If the
connection is good, then check that the hard drives are installed correctly
and have no other issues. Click
Next
to continue.
Note:
When you select your device from the list, it will cause the LEDs to
blink to confirm the device selection.
Note:
All configured NVRs are shown with their names in orange, while all
NVRs not configured are in blue.
