10
D-Link DNR-312L User Manual
Section 2 - Installation
The following instructions show you how to set up the NVR using your
Windows computer. If you are using a Mac computer, refer to
Setup Wizard
- Mac
on page 18.
Step 1
Insert the Installation CD-ROM into your computer’s optical drive to start
the autorun program. Click
Start
to begin the wizard.
Note:
If the autorun program does not automatically start on your computer, click the
Start
button and type
D:\autorun.exe
(where D: represents the drive letter of
your CD-ROM drive) and press
Enter
. When the autorun screen appears, click
Install and follow the on-screen instructions.
You can also visit
www.dlink.com/support
to download the software for your
product.
Setup Wizard - Windows
Note:
The computer used to access the NVR must be on the same subnet as the NVR. If your network is using a DHCP server, the NVR
will automatically be in the same subnet.
Step 2
Click
Next
to proceed.
