20
Using the Configuration Utility (continued)
Tools
Confirm Password:
Enter the new password
again.
Tools > Admin
Save:
Click to save the configuration settings
to the local hard drive.
Click here to check for any new
firmware upgrade on our support site:
Click on this link to find information about
firmware upgrades on D-Link’s support site.
Download the firmware upgrade from the
support site to your computer’s hard drive.
Browse:
After you have downloaded the
firmware upgrade to your hard drive, click
Browse to find the upgrade. When you have
found it, click Open in the browser window
and click Apply in this screen to begin the
firmware upgrade.
Reboot:
Click to reboot the DSM-602H/
604H.
Tools > System
Tools > Firmware
Tools > Misc.
The administrator can change his/her login
password here.
Browse:
Click to browse for settings saved
on your hard drive.
Load:
Click to load the settings.
Restore:
Click to restore the DSM-602H/
604H to its factory default settings. You will
lose any current settings.
New Password:
Enter the new password
here.
