background image

11

D-Link KVM-121 Quick Install Guide

Configuration

•  If a special mouse is used such as a cordless or scrolling mouse, 

make sure you use generic PS/2 mouse drivers. A non-standard 
PS/2 mouse may have extensions on the PS/2 protocol that are 
not supported by the KVM-121.

•  Do  not  move  the  mouse  or  press  any  mouse  buttons  when 

switching from one PC to another.

•  Try resetting the mouse by unplugging it from the KVM-121 for 

about 3 seconds and then reconnect.

Video

If the image on your monitor is not clear, check the following:
•  Verify that all video monitor cables are inserted properly. Make sure 

that the blue coated VGA cable is connected to your computer and 
that the black coated cable is connected to the KVM-121.

•  Try lowering the resolution and refresh rate of your monitor.
•  Try using a shorter video cable.

Audio

If your audio is not functional properly check the following:
•  Make sure that the speakers are properly connected to the KVM-121. 

Check that the green coated audio cable is plugged into the correct 
audio jack (green colored).

•  Verify that the speaker works when plugged into the computer 

directly. 

•  Try using a different set of speakers.

Содержание KVM-121













Отзывы: