68
D-Link DIR-1960 User Manual
Section 4 - Configuration
Static Routes
The Static Routes section allows you to define custom routes to control how
data traffic is moved around your network.
In the Features menu on the bar on the top of the page, click
Static Routes
.
To configure IPv6 rules, click
IPv6
and refer to
. To return to
the main IPv4 static routes page, click
IPv4
.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the
Add Route
button. Click
Save
when you are done.
If you edit or create a rule, the following options will appear:
Name:
Enter a name for the rule.
Destination
Network:
Enter the IP address of packets that will take this route.
Mask:
Enter the subnet mask of the route.
Gateway:
Enter your next hop gateway to be taken if this route is used.
Metric:
The route metric is a value from 1 to 16 that indicates the cost of using
this route. A value of 1 is the lowest cost and 15 is the highest cost.
Interface:
Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click
Save
when you are done.
