69
D-Link DIR-1960 User Manual
Section 4 - Configuration
IPv6
To configure IPv6 rules, on the Static Routes page click
IPv6
. To return to the
main IPv4 static routes page, click
IPv4
.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the
Add Rules
button. Click
Save
when you are done. If
you edit or create a rule, the following options will appear:
Name:
Enter a name for the rule.
DestNetwork:
This is the IP address of the router used to reach the specified
destination.
PrefixLen:
Enter the IPv6 address prefix length of the packets that will take this
route.
Gateway:
Enter your next hop gateway to be taken if this route is used.
Metric:
Enter the metric value for this rule here.
Interface:
Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click
Save
when you are done.
