background image

56

D-Link DIR-X4860 User Manual

Section 3 - Configuration

If Triple-Play Status is 

Enabled

:

Priority ID

Enable or disable traffic priority ID for the Internet, IPTV, and 

VoIP VLANs. If Priority ID is enabled, Priority ID options are 

available for configuration. Select a priority ID from the drop-

down menus to assign to the corresponding VLAN. Higher 

priority ID traffic takes precedence over traffic with a low 

priority ID tag.

VLAN TAG

Enable VLAN TAG to enter VLAN ID, as provided by your ISP

Internet VLAN ID

Enter the VLAN ID for your Internet connection, as provided 

by your ISP.

IPTV VLAN ID

Enter the VLAN ID for your IPTV service, as provided by your ISP.

VOIP VLAN ID

Enter the VLAN ID for your VoIP network, as provided by your 

ISP.

Interface Traffic Type Setting

LAN Port 1-4

From the drop-down menu, you can select the type of 

connection (Internet, IPTV, or Voice over IP) coming from the 

WAN connection to each interface on the router.

Содержание EXO AX DIR-X4860-US














































































































































































Отзывы: